功能
选项
规格
| 规格 | 参数值 |
|---|---|
| 检测方法 | Hall element |
| 测量范围 | 1㎐~20㎑(using a 60P/R gear, 1~20,000r/min, with an output waveform duty cycle 50%±20%) |
| 检测齿轮 | Strong magnetic materials |
| 检测器与齿轮的间隙 | (modulus 0.5~3, tooth width 3 mm or greater) |
| 电源 | DC 12V±2V(0.5Vp-p or less ripple) |
| 电流消耗 | 40mA or less(12V, at 25℃) |
| 输出波形 | Lew level;±0.5V rectangular waveform(With no loac) |
| 输出阻抗 | Approx. 330Ω |
| 输出类型 | Floating groung |
| 保护电路 | Power supply polarity and output short protection |
| 使用温度范围 | -10℃~+70℃ |
| 贮存温度范围 | -20℃~+80℃ |
| 匹配连接器 | 6-pin connector(type R04-PB6F plug) |
| 允许震动 | double-ended 1.2mm at 30㎐ in X, Y and Z direction |
| (操作中) | for one hour each |
| 允许冲击(无操作) | 490m/s2 in X and Y direction each 3 times |
| 耐压 | 1. DC250V, 1min.(between shield and signal cable) 2. DC250V, 1min.(between shield and sensor head |
| 连接仪表 | DN-30 |
| 重量 | Approx. 80g(including two mounting nuts) |
| 配件 | Mounting nuts(2) |
尺寸
