PT113

INTEGRATION

RS-232C, RS-485
Modbus RTU
Modbus TCP on Ethernet
PROFIBUS
PROFINET
CANopen

FEATURES

Up to 100 measurements per second
8,000,000 internal resolutions
Up to 100000 scale divisions for weighing
Uni-directional or Bidirectional measurement mode for tension/compression
Up to 6x 350 Ω load cells
Weighing functions: Zeroing & taring, power-on zero, AZT, net indication at power on, motion detection.
Industrial design with small size and standard DIN rail mounting
vCal Electronic calibration from PC
Programmable via PC or fieldbus
RS-232C serial interface for programming with AzCom software via PC
11 - 28 VDC supply

SPECIFICATIONS

Power Supply: 11-28VDC max., 300mA.Non-linearity:

Calibration: Span calibration with weights by RS-232, fieldbus or AzCom software.vCal for calibration by direct entry of load cell characteristics with AzCom software.In count mode all instruments are factory calibrated for on site calibration in the PLC.Weighing Functions: Tare, zero, auto zero tracking, motion detection, auto-zero at power-up.Digital Filter: Adaptable filter adjustable in 10 steps.RS-232C: 9600 baud, 8N1. Continuous, Command, BSIRS-485: 1200 to 57600 baud, programmable. Up to 31 units on the busModbus RTU: 1200 to 57600 baud, programmable, up to 31 units on the RS-485 bus.Modbus TCP (on Ethernet): 10 Mbit/s (half duplex), galvanically isolated.PROFIBUS: PROFIBUS DP V1. 9.6 kbit/s to 12 Mbit/s automatic baud rate detection.PROFINET: 100 Mbit/s (full duplex), galvanically isolated.CANopen: 10 kbit/s to 1 Mbit/s automatic baud rate detection.

table (Due to PT’s policy of continuous development, specifications and products offered are subject to change without notice.)

Cooperation Brand

PT113

Details

Contacts

Wechat