13066986209

Cooperation Brand

D100

Introduction:

Features & Applications

The Series D100 power supplies are regulated, preset voltage sources, ideally suited for DC excited transducers, discrete and IC function modules. All components are encapsulated to provide reliable continuous operation to rated specifications in laboratory and factory environments. They are equipped with an on-off switch, line cord, binding post terminals, rubber feet and a #4-40 tapped hole located on the bottom side for permanent mounting. The hole is connected to earth ground via the power line cord ground terminal.

Details
  • Compatible with DC LVDTs and ADTs                           KEY FEATURES

  • Compact Package

  • High Regulation

  • Short Circuit Protected

COMMON SPECIFICATIONS

INPUT 105 to 125 VAC, 50 to 400 Hz STORAGE TEMPERATURE -40°F to +185° (-40°C to +85°C)
OUTPUT VOLTAGE TOLERANCE ±1% (Fixed) TERMINATION Line Cord, 3-wire, 5 feet long, terminated in line plug with earth ground.
REGULATION Line 0.05% Max., Load 0.10% Max. OUTPUT TERMINALS 3-Binding Post, 6-Way
TEMPERATURE COEFFICIENT 0.02% /°C Typ Red – Positive Voltage
RIPPLE AND NOISE 1m VRMS Max. Black – Common
I/O ISOLATION 50 MegaOhms  Violet – Negative Voltage
OVERCURRENT PROTECTION Current Limiting: Either input to common or other output, indefinitely DIMENSIONS In. (mm) WxLxH 2.5 (64) x 4.45 (113) x 1.25 (32)
OPERATING TEMPERATURE -13°F to +160°F (-25°C to +71°C) APPROXIMATE WEIGHT 1.6 lbs.

SPECIFICATIONS

MODEL NUMBER D12.200 D15.200
OUTPUT, VDC ±12 ±15
CURRENT, mA 200 200


Online Service
Contacts

Tel

13066986209

contacts

Miss Zhang

Wechat
Customer service