Ranges from ±0.05” to 0.20” KEY FEATURES
High Sensitivity
Non-linearity
Stainless Steel Construction
SPECIFICATIONS - ELECTRICAL
| MODEL | 0200-00000 | 0200-00010 | 0201-00000 | 0201-00010 |
| RANGE, ±Inches (±mm) | 0.050(1.27) | 0.50 (1.27) | 0.100 (2.54) | 0.100(2.54) |
| INPUT, VDC | 7 Max, 5 Min | |||
| INPUT, mA | 20 | 20 | 35 | 35 |
| OUTPUT, FULL SCALE OPEN CIRCUIT, ±VDC | 1.5 | 1.5 | 2.8 | 2.8 |
| LINEARITY, ±FULL SCALE, % | 0.5 | 0.3 | 0.5 | 0.3 |
| INTERNAL CARRIER FREQUENCY | 9KHz | |||
| MAX RIPPLE, RMS/VDC Output Range | 0.7% | |||
| OUTPUT IMPEDANCE, KOhms | 2.2 | 2.2 | 3.0 | 3.0 |
| FREQ. RESPONSE (3 dB down), Hz | 350 | 350 | 170 | 170 |
| TEMPERATURE RANGE | -65°F to +140°F (-54°C to +60°C) | |||
| RESOLUTION | Infinite | |||
Notes:
Polarity of excitation must be observed for proper function. Reversal will not damage the unit.
Load Impedance of 50 KOhms minimum required for proper operation.
Output polarity will be positive on one side of null, negative on the other side of null.
Blue lead is more positive with respect to the Green lead when the core is moved toward the lead end.
SPECIFICATIONS - MECHANICAL
| MODEL* | LINEAR RANGE ±Inches (mm) |
BODY LENGTH, A Inches (mm) |
ELECTRICAL CENTER, Ec Inches (mm) |
BODY MASS Grams |
CORE LENGTH, B Inches (mm) |
EXTENSION LENGTH, E Inches (mm) |
| 0200-0000__ | 0.05 (1.27) | 0.81 (20.6) | 0.32 (8.13) | 21 | 0.56 (14.2) | 1.9 (48.3) |
| 0200-0001__ | 0.05 (1.27) | 0.81(20.6) | 0.32 (8.13) | 21 | 0.56 (14.2) | 1.9 (48.3) |
| 0201-0000__ | 0.10 (2.54) | 1.06 (26.9) | 0.44 (11.2) | 26 | 0.81 (20.6) | 1.9 (48.3) |
| 0201-0001__ | 0.10 (2.54) | 1.06 (26.9) | 0.44 (11.2) | 26 | 0.81 (20.6) | 1.9 (48.3) |
* Model numbers ending with a “_” have multiple core options. All standard units will end with a 0 indicating a core assembly. This core assembly consists of a core brazed to an extension rod that terminates in 1-72 UNF-2A threads. If an option is not selected, option 0 will be provided. Option 1 indicates a core assembly with a smaller core. Core options 2 and 3 provide a threaded core only. A separate extension rod can be used to connect the core to the moving object.
DIMENSIONAL DIAGRAM
BLOCK DIAGRAM
CORE OPTIONS
| Core Assembly Ref Fig. 1 | Threaded Core Ref Fig. 2 | |||
| OPTION 0 | OPTION 1 | OPTION 2 | OPTION 3 | |
| MODEL | C = 0.120″ (3.05mm) |
C = 0.099″ (2.51mm) |
C = 0.120″ (3.05mm) |
C = 0.099″ (2.51mm) |
| 0200-0000__ | C004-0000 | C004-0001 | C005-0002 | C005-0003 |
| 0200-0001__ | C004-0000 | C004-0001 | C005-0002 | C005-0003 |
| 0201-0000__ | C004-0002 | C004-0003 | C005-0006 | C005-0007 |
| 0201-0001__ | C004-0002 | C004-0003 | C005-0006 | C005-0007 |
* Model numbers ending with a “_” have multiple core options. All standard units will end with a 0 indicating a core assembly. This core assembly consists of a core brazed to an extension rod that terminates in 1-72 UNF-2A threads. If an option is not selected, option 0 will be provided. Option 1 indicates a core assembly with a smaller core. Core options 2 and 3 provide a threaded core only. A separate extension rod can be used to connect the core to the moving object.
SALE OPTIONS
| Option# | Description |
| X0002 | Splashproof – protects the unit from washdown environments or outdoor applications |
| X0004 | Modify length of the extension rod from 1.9” to user specified length; specify as Dimension E |
| X0010 | Option cable termination; eight feet of 4 conductor, 22 AWG, PVC cable |
| X0011 | Provide an offset and scaled output voltage; special connector and mating connector included; used only with load impedances of 1 Megaohm or greater; input voltage and scaling parameters must be specified |
| X0017 | Modify unit for use in any noncorrosive, nonconductive medium, such as hydraulic fluid, for pressure |
| X0023 | Install second brazed extension rod to user specified length; specify as Dimension E |
| X0025 | Optional MS-style connector termination. Increases O.D. to 1.00”; mating connector supplied |
| X0040 | Optional cable termination; eight feet of 4 conductor, 22 AWG, Teflon cable; temperature range increased to -65°F to +250°F (-55°C to +121°C) |
OPTION X0025
CAD Drawings
