KFG series universal foil strain gauge
Excellent bending, good waterproof and moisture resistance, if not in direct contact with water, no coating treatment is required
Operating temperature range: -196-150℃; Deformation limit: 5% (single axis)
Sensitive grid length: 0.2, 0.3, 1, 2, 3, 4, 5, 6, 10, 20, 30mm
Strain gauge type: single axis, double axis, three axis, four axis, single axis 5 pieces, double axis 5 pieces
Self-compensated expansion coefficient: 5, 11, 16, 23, 27× microstrain / ℃
Resistance: 60, 120, 350, 500, 1000 ohms, wire: can be with or without according to the requirements
Special applications: general purpose single shaft, pressure analysis, torque measurement, shear strain, concentrated stress, etc
KH High temperature welding strain gauge
Operating temperature: -50-350℃
Resistance: 350 ohms
Grid length: 5mm
Self-compensating expansion coefficient: 11, 16× micro-strain / ℃
Connection mode: welding, (with low power current welding machine)
Application: Very suitable for long-term strain monitoring and high temperature strain measurement under harsh conditions
KFW/KFWS series waterproof strain gauge
Product usage: Directly used for underwater or outdoor water multi-environment measurement, without any protection, very convenient
Use environment: underwater 10MPA, 100 hours (if with special protection, can be measured underwater for a long time)
Sensitive grid length: 2, 5mm (only KFW has 5mm) Type: Single axis, two axis, three axis (only KFW)
Resistance: 120 ohms, 350 ohms (120 ohms only available on KFW)
KCW series weldable waterproof strain gauge
Application: underwater measurement or long-term measurement of waterproof environment
Product type: Single axis unit: G10 and full bridge type: G14S type two
Expansion coefficient: 11× microstrain / ℃, temperature range: -20-100℃
Flange size: 5×21mm
KC/KFG series concrete strain gauge
Application: Mainly used for measuring concrete
KC linear plate: Sensitive grid length: 60, 70, 80, 120mm Type: Single axis
KFG foil strain gauge: sensitive grid length: 10, 20, 30mm
Type: Single axis, two axis, three axis (two axis, three axis only 10mm)
Weldable ultra-high temperature strain gauge (550-800℃)
Model: KHCD: 800℃ (dynamic strain) KHCS: 750℃KHCM: 650℃KHC: 550℃
Sensitive grid length: 5mm (KHC, KHCD), 10mm (KHCS, KHCM, KHC) 20mm (KHC)
Type: Single axis, double chip (KHCS, KHCM, KHC), single chip active (KHCD)
Installation method: spot welding installation
KFU high temperature foil strain gauge
Operating temperature: -196-300℃
Sensitive grid length: 2, 5mm
Sheet type: uniaxial, biaxial, triaxial (triaxial strain flower); Resistance: 120 ohms, 350 ohms
KFH high temperature foil strain gauge
Operating temperature: -196-250℃
Sensitive grid length: 0.2, 0.5, 2, 5mm
Sheet type: uniaxial, biaxial, triaxial (triaxial strain flower); Resistance: 120 ohms, 350 ohms
KFL low temperature strain gauge
Working temperature: -269-80℃; Sensitive grid length: 0.2, 0.5, 1, 2, 5, 30mm
Type: Single axis, double axis, triple axis; Expansion coefficient: 5, 11, 16, 23 micro-strain / ℃
KFEM high elongation foil strain gauge
Strain limit: 20%-30% material strain; Improved the extensibility of platinum material, not easy to break the wire
Sensitive grid length: 2mm, 5mm; Resistance: 120 ohms
KFGT with temperature sensor strain gauge
Function: Strain gauge and T thermocouple integrated, can measure strain and temperature at the same time
Sensitive grid: 2, 5mm; Type: Single axis; Resistance: 120 ohms
Expansion coefficient: 11, 16, 23, 27 micro strain / ℃, wire: 1m
KFG measures residual stress
Model: With terminals and removal wires for easy connection, the other is by insertion method
Sensitive grid length: Terminal type: single axis, double axis, three axis; 1, 2mm, drilling type: 1.5, 3mm
KLM high elongation metal wire strain gauge
Use: Measuring plastic strain, range: 4-20%; Sensitive grid length: 6mm
Type: Single axis; Operating temperature: -10-80℃
Semiconductor strain gauge
Characteristics: The semiconductor resistance sheet has a gain dozens of times higher than the foil metal sheet strain gauge, material: special heat-resistant alloy
Sensitive grid length: 1, 2, 3, 4, 6, 7mm; Expansion coefficient: 11, 16 microstrain / ℃
KFG measuring bolt axial force strain gauge
To measure bolt fastening force, the measuring surface is difficult to paste, and the strain gauge is embedded in the center of the bolt
Drilling diameter: 2mm; Length: 1.5, 3mm; Expansion coefficient: 11 microstrain / ℃
Glue: CC-33A, PC-6
