With the help of a strain gauge, the strain and stress in the material can be determined and conclusions about the stress of the component can be drawn.
We develop professional in-house SG applications on your components according to your specific needs. Thanks to the many years of experience of our employees in the field of SG applications, we ensure the highest quality of the measuring points and a very long service life.
We are happy to advise you on the following aspects of your project:
Precisely define appropriate measurement points with the expert assistance of our experienced staff
Upon request, we will create computer simulations based on your design drawing using finite element method (FEM) to predict and visualize the forces (stresses) that may occur
Choose the right strain gauge carefully
Mark and wire for quarter, half or full bridge for torsion, bending, tensile and compression force measurement.
Heat hardening adhesive applications, chemical resistance and many years
Bridge resistor Quarter bridge: 175 ohms... 2500 ohms
Bridge resistance Full bridge: 120 ohms... 5000 ohms
Connection technology possibilities: 2,3,4 and 6 wires
Compensation for temperature effects and other disturbing variables
Temperature range: -40°C... 200°C
Applicable component materials: Aluminum, steel, plastic, ceramic...
Proper protection against environmental impacts: mineral oil, silicone oil, moisture, splash, pressurized water, overpressure, negative pressure...
The SG is used for indoor thermal applications with measuring objects weighing 100 kg and dimensions (L x W x H) of 800 x 500 x 500 mm
